I-Fiberglass eQiweyo ye-Strand Mat (I-Binder: i-Emulsion kunye nePowder) Umfanekiso obonakalayo

I-Fiberglass eQitywe iStrand Mat(Isibophelelo: iEmulsion kunye nomgubo)

Inkcazelo emfutshane:

I-ACM inokuvelisa i-Emulsion Chopped Strand Mat kunye nePowder Chopped Strand Mat. I-Emulsion Chopped Strand Mats zenziwe ngeentambo ezinqunqiweyo ezisasazwe ngokungacwangciswanga zibanjwe kunye ne-emulsion binder. I-Powder Chopped Strand Mat yenziwe ngemisonto enqunqiweyo esasazwe ngokungacwangciswanga ebanjwe kunye sisibophelelo samandla. Ziyahambelana ne-UP VE EP resins. Zombini ezi ntlobo zemathi yobubanzi bobubanzi busuka kwi-200mm ukuya kwi-3,200mm. Ubunzima buqala kwi-70 ukuya kwi-900g/㎡. Kuyenzeka ukuguqula naziphi na iinkcukacha ezikhethekileyo zobude beMat.

Igama lebrand:I-ACM

Indawo yemvelaphi:Thayilendi

Ubuchwephesha:I-Strand Mat enqunyulwe

Uhlobo lwesibophelelo:Emulsion/Powder

Uhlobo lweFiberglass:I-ECR-iglasi ye-E-glass

I-Resin:PHEZULU/VE/EP

Ukupakisha:Ukupakishwa kokuThunyelelwa koMgangatho waMazwe ngaMazwe

Isicelo:Iinqanawa / i-Automotive / iMibhobho / iTanki / iiTowers zokupholisa / iZixhobo zoKwakha

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Isicelo

I-strand mat echotshiweyo, icandelo elibalulekileyo kwi-Fiber Reinforced Plastics (FRP), fumana ukusetyenziswa okubanzi kumashishini ahlukeneyo. Ezi mathi zisebenza ngeendlela ezininzi zisetyenziswa ikakhulu kwiinkqubo ezifana nokubekwa kwezandla, ukujija iintambo, kunye nokubumba ukwenza uluhlu lweemveliso ezikhethekileyo. Ukusetyenziswa kweemethi zomsonto onqunqiweyo zithatha indawo ebanzi, ebandakanya ukwenziwa kweepaneli, iitanki, izikhephe, iinxalenye zemoto, iinqaba zokupholisa, imibhobho nokunye okuninzi.

Ubunzima	Ubunzima beNdawo (%)	Umxholo wokufuma (%)	Umxholo wobungakanani (%)		Ukwaphuka Amandla (N)	Ububanzi (mm)
Indlela	ISO3374	ISO3344	ISO1887		ISO3342	ISO 3374
Indlela	ISO3374	ISO3344	Umgubo	Emulsion	ISO3342	ISO 3374
I-EMC100	100±10	≤0.20	5.2-12.0	5.2-12.0	≥80	100mm-3600mm
I-EMC150	150±10	≤0.20	4.3-10.0	4.3-10.0	≥100	100mm-3600mm
I-EMC225	225±10	≤0.20	3.0-5.3	3.0-5.3	≥100	100mm-3600mm
EMC300	300±10	≤0.20	2.1-3.8	2.2-3.8	≥120	100mm-3600mm
EMC450	450±10	≤0.20	2.1-3.8	2.2-3.8	≥120	100mm-3600mm
EMC600	600±10	≤0.20	2.1-3.8	2.2-3.8	≥150	100mm-3600mm
EMC900	900±10	≤0.20	2.1-3.8	2.2-3.8	≥180	100mm-3600mm

Izakhono

1. Ukusasazwa ngokungaqhelekanga kunye neempawu ezibalaseleyo zoomatshini.
2. Ukuhambelana okugqwesileyo kunye ne-resin, ukucoca indawo, ukuqina kakuhle
3. Ukumelana nokufudumeza okugqwesileyo.
4. Isantya esikhawulezayo kunye nokuphuma kakuhle kwamanzi
5. Uzalisa ngokulula ukubumba kwaye uqinisekisa kwiimilo ezinzima

Ugcino

Ngaphandle kokuba kuchazwe ngenye indlela, iimveliso ze-fiberglass kufuneka zigcinwe kwindawo eyomileyo, epholileyo kunye nobungqina bokufuma. Ubushushu begumbi kunye nokufuma kufuneka kuhlale kugcinwe kwi-15 ° C - 35 ° C, 35% - 65% ngokulandelelanayo. Eyona isetyenziswayo kwiinyanga ezili-12 emva komhla wemveliso. Iimveliso zeFiberglass kufuneka zihlale kwipakethe yazo yokuqala de kube ngaphambi kokusetyenziswa.

Ukupakisha

Umqulu ngamnye uhlanganiswe kwifilimu yeplastiki kwaye emva koko ifakwe kwibhokisi yekhadibhodi. Imiqulu ipakishwe ngokuthe tye okanye ngokuthe nkqo kwiipaliti.
Zonke iipaliti zolule zisongelwe kwaye ziboshwe ukuze zigcine uzinzo ngexesha lokuthutha.