I-ECR-glass edibeneyo ejikelezayo ye-Strand Mat eqoshiweyo Umfanekiso ocacileyo

I-ECR-glass Edibeneyo Ijikeleza I-Strand Mat Eqoshiweyo

Inkcazo emfutshane:

Ukuzulazula okudibeneyo kuyanqunyulwa kube kubude obuthile kwaye kusasazwe kuze kuphoswe ebhantini. Emva koko kudityaniswe ne-emulsion okanye i-powder binder ekupheleni ngokumisa, ukupholisa kunye nokusonga, kwenziwa imathi. I-Assembled Roving For Chopped Strand mat yenzelwe ukusebenzisa ubungakanani be-silane yokuqinisa kunye nokubonelela ngokuqina okuhle, ukusasazeka okuhle, ukusebenza ngokukhawuleza kokumanzisa njl.njl. Ukuzulazula kwi-strand eqoshiweyo kuhambelana ne-UP VE resin. Ezi zisetyenziswa kakhulu kwinkqubo ye-strand eqoshiweyo.

Igama lebrand:I-ACM

Indawo yemvelaphi:Thayilendi

Indlela yokusebenza:Inkqubo Yokuvelisa I-Strand Mat Eqoshiweyo

Uhlobo lokuzulazula:Ukuzulazula Okudibeneyo

Uhlobo lwe-fiberglass:Iglasi ye-ECR

I-resin:Phezulu/Ve

Ukupakisha:Ukupakisha okuqhelekileyo kwamazwe ngamazwe okuThunyelwa kwamanye amazwe

Isicelo:I-String Mat eqoshiweyo/ I-Low Weight Mat/ I-Stitched Mat

Yenziwe eThailand
Iirhafu zokuthunyelwa kwempahla eMelika nase-EU ziphantsi

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Isicelo

Idla ngokusetyenziselwa ukwenza i-Chopped Strand Mat, i-Low Weight Mat, kunye ne-Stitched Mat.

Ikhowudi yeMveliso	Ububanzi bentambo （μm）	Uxinano oluLula (iteksi)	I-Resin ehambelanayo	Iimpawu zeMveliso	Isicelo seMveliso
EWT938/938A	13	2400	Phezulu/Ve	Kulula ukusika Ukusasazwa okuhle I-electrostatic ephantsi Ukumanzisa ngokukhawuleza	Imathi enqunqiweyo yentambo
EWT938B	12				100-150g/㎡ Imathi enobunzima obuphantsi
EWT938D	13				Imathi ethungiweyo

Iimbonakalo

1. Ukunqunyulwa kakuhle kunye nokuqokelelana okuhle.
2. Ukusasazwa kakuhle uze ulale phantsi.
3. Iipropati eziphantsi ezingashukumiyo, ezibalaseleyo zoomatshini.
4. Ukugeleza kakuhle kokubumba kunye nokumanzisa ngaphandle.
5. I-resin imanzi kakuhle.

Imiyalelo

·Imveliso mayigcinwe kwiphakheji yayo yokuqala ide isetyenziswe kuba isebenza kakuhle xa isetyenziswa zingadlulanga iinyanga ezili-9 emva kokudalwa.
·Kufuneka kuqatshelwe xa usebenzisa imveliso ukuze ingakrweleki okanye yonakale.
·Ubushushu kunye nokufuma kwemveliso kufuneka kubekwe ecaleni okanye kulingane nobushushu kunye nokufuma okukufutshane ngokulandelelanayo ngaphambi kokuba kusetyenziswe, kwaye ubushushu xa imveliso isetyenziswa bungcono bube phakathi kwe-5℃ ukuya kwi-30℃.
·Ukugcinwa rhoqo kweerola zerabha kunye neerola zokusika kufuneka kwenziwe.

Indawo yokugcina izinto

Izinto zefiberglass mazigcinwe zomile, zibanda, kwaye zingabi namanzi ngaphandle kokuba kuchazwe ngenye indlela. Uluhlu olufanelekileyo lobushushu kunye nokufuma yi--10°C ukuya kwi-35°C kunye ne-80%, ngokulandelelana. Iipallets mazibekwe zingadluli kwimigangatho emithathu ukuphakama ukuze kugcinwe ukhuseleko kunye nokuthintela umonakalo kwimveliso. Kubaluleke kakhulu ukuhambisa ipallet ephezulu ngokuchanekileyo nangokutyibilikayo xa iipallets zibekwe kwimigangatho emibini okanye emithathu.